DIY Teleprompter: 4 Homemade Ways to Build One
A DIY teleprompter takes one of two forms: a no-glass setup that puts a scrolling script on a screen right under the camera lens, or a glass rig where a sheet of angled glass or acrylic reflects the screen in front of the lens. The no-glass version takes five minutes and costs nothing; the glass version looks the most natural and takes an afternoon. Gazecue, the top pick for the script side on iPhone and iPad, is free to download and has the scrolling prompter, a movable reading line and, with Pro, the mirror modes a glass rig needs.
Which DIY teleprompter should you make?
Pick by what you have on the desk and how much eye contact you need. All four methods below use a normal screen and a free or low-cost prompter app; they differ in where the script sits relative to the lens.
| Build | What you need | Time | Eye contact | Best for |
|---|---|---|---|---|
| 1. Laptop under the webcam | Laptop, scripts, a free prompter | 5 minutes | Good if the text window sits at the top edge | Calls and quick videos |
| 2. Phone prompter under a second camera | iPhone or iPad, tripod or stand | 10 minutes | Good at 1 m or more | Talking-head videos |
| 3. Picture-frame glass rig | Frame glass or acrylic, box or stand, black card, iPad or iPhone | 1 to 3 hours | Best: text floats in front of the lens | YouTube, interviews, speeches |
| 4. Desk-mounted stack | Monitor or iPad, stand, camera on a stack of books | 15 minutes | Good, depends on the gap to the lens | Fixed home studio |
How to make a teleprompter at home with no glass
Teleprompter glass solves a problem you can often reduce instead of solve: the angle between the lens and the text. Put the script as close to the lens as possible, use a short line, and sit back. The geometry is explained in Teleprompter font size and distance.
- Open your script in a prompter app and set a large text size so about 6 to 8 words fit on a line.
- Put the screen right below the camera. For an iPhone, tripod it with the lens at the top; for a second camera, set the phone directly under the lens.
- Move the reading line as high as it goes, so the line you are saying is next to the lens.
- Sit 1 m (3 feet) or more from the screen and test for 20 seconds. If your eyes visibly sweep sideways, make the text larger and sit farther back.
- Press record. Slow the speed if you run ahead of the text, speed it up if you wait.
DIY teleprompter with a laptop
A laptop is the quickest DIY teleprompter because the webcam is already above the screen. Open your script in a window and put it at the very top of the display, directly under the webcam, then make the window narrow so each line is short. Set the text large and scroll at a steady pace.
- Use a text editor or a web page with large type, white on black.
- Make the window about a third of the screen wide, centered under the webcam.
- Hide the dock and notifications before you start.
- Record the video with a separate app, not the same window as the script.
The limit is on the camera side: a laptop webcam is a modest camera. If picture quality matters, use the laptop as the script screen and film with your phone on a tripod behind it, or flip it: put the script on an iPhone or iPad and film with a better camera. Gazecue is an iPhone and iPad app, so the iPhone or iPad route below is where it fits.
DIY teleprompter for iPhone or iPad
This is the setup most creators end up with: the phone is both camera and prompter. You see the script and the preview in one device, which is why it works for quick videos. Gazecue also records with the back camera if you prefer it.
- Install a prompter that records in the app. In Gazecue the script and the front or back camera are one screen: the text scrolls over the live camera image.
- Mount the phone on a tripod at eye level. A stack of books works too.
- Write or import your script (.txt, .md, .rtf or .pdf) and set the speed in words per minute.
- Set the countdown to 3, 5 or 10 seconds so you have time to sit back after you tap record.
- Test with the preview, then record.
With an iPad as the prompter and an iPhone as the camera, use Prompter only mode in Gazecue on the iPad. It shows the script without the camera, so the iPad does nothing but scroll text while the iPhone records the picture you actually want. This is also the basis of the glass rig below.
How to make a DIY teleprompter with glass
A glass teleprompter reflects the screen in the glass while the camera films through it, so the script appears right in front of the lens and you look straight into it. Professional rigs use beam-splitter glass. A homemade one can use clear glass or acrylic with mirror window film, or a sheet of glass from a picture frame, with trade-offs explained below.
Parts for a glass rig
- The glass: a sheet of glass or acrylic about the size of a picture frame, at least as wide as your screen. Glass reflects better than thin acrylic, and sharp edges need tape.
- The coating: a mirror-effect (one-way) window film, applied to the glass, makes the reflection brighter while still letting the camera see through. Plain clear glass gives a fainter reflection and works best in a dim room.
- The hood: a black cloth or card shield around the lens side, so light from your side does not wash out the reflection.
- The box or stand: anything that holds the glass at about 45 degrees above a flat, face-up screen, with the camera behind the glass.
- The screen: an iPad or iPhone lying face up under the glass.
- Tools: tape, a ruler, a protractor or a phone angle app, black card or paper.
Steps to build it
- Cut or choose a frame of cardboard or wood that holds the glass at 45 degrees. Make a slot or tape strips along the edges and cover them with felt to protect the glass.
- Apply the mirror film to the glass if you use it, following the film's instructions, and wipe out bubbles.
- Put the screen face up on the base, under the glass. The glass must reflect the entire text area.
- Mount the camera on a tripod behind the glass, with the lens centred on the open side. Shield the gap around the lens with black card so you do not see your own reflection or the room in the glass.
- Open a prompter app and turn on the mirror mode so the reflected text reads correctly (see below).
- Test in your recording lighting. If the reflection is faint, turn the screen brightness to maximum and dim the light in front of the glass.
Mirror the text so it reads right
A reflection reverses the text, so a glass rig needs a mirror mode. Gazecue Pro has mirror horizontal, vertical or both, and only the text flips, not the camera preview or the saved file. Horizontal is the usual setting for a screen lying under the glass; if the text is upside down or scrolls the wrong way, add vertical. The full explanation is in Mirror and flip text for teleprompter glass, and Teleprompter rig setup covers the mounting side.
Honest limits of a homemade rig
- Picture-frame glass without a coating gives a dim image and may show a double reflection. A film or a dim room fixes much of that.
- Homemade frames flex; a rig that shifts after you tap the screen ruins a take. Use a base, not a handheld.
- You see the text, but the glass does not make you read better. Practice with a speed guide.
- If you only record short clips on a phone, a no-glass setup is quicker and almost as good.
DIY teleprompter with a remote
Tapping the screen to start or pause disturbs the setup. A Bluetooth keyboard or page-turner lets you start, pause and move a line from a distance. In Gazecue the keyboard shortcuts and Bluetooth page-turner (keys) are part of Pro; Left and Right move the script by one line. Not every shutter remote or pedal sends those keys, so test yours first. The shortcut list is on the features page.
- Space ReturnPlay or pause
- ↑ ←Back one line
- ↓ →Forward one line
- PgUp PgDnBack or forward one page
- + -Faster or slower
- RBack to the start
- EscClose the prompter
Script setup that makes any DIY rig better
A homemade rig will not forgive a script that was written for the page. Short sentences, one idea per line, and a pause marker where you breathe help more than another bracket. See How to write a video script and How to read a script while recording and keep eye contact.
FAQ
How do I make a teleprompter at home?
Put a scrolling script on a screen directly under the camera lens, use large text with 6 to 8 words per line, and sit 1 m or more back. For better eye contact, add an angled sheet of glass or acrylic that reflects the screen in front of the lens.
How do I make a DIY teleprompter for iPhone?
Mount the iPhone on a tripod at eye level, open a prompter app that records in the app, and set the reading line near the lens. Gazecue shows the script over the live camera image, so no extra gear is needed.
Can I make a teleprompter with picture-frame glass?
Yes. Hold the glass at about 45 degrees above a face-up screen with the camera behind it. Mirror-effect window film makes the reflection brighter, and a mirror mode in the app flips the text so it reads correctly.
How do I make a DIY teleprompter with a laptop?
Open the script in a narrow window at the top of the screen, directly below the webcam, with large light text on a dark background. Record in a separate app.
What do I need for a DIY teleprompter for iPad?
An iPad, a stand or box, glass at 45 degrees, a camera or phone behind the glass and a prompter app with a mirror mode. Gazecue's Prompter only mode shows the script without the camera, and the mirror modes are part of Pro.
Does a homemade teleprompter work as well as a real one?
A well-built rig with coated glass can look very close. Unbranded kits and DIY builds differ mainly in reflection quality and stability, so test in your lighting before an important recording.
Is there a free teleprompter app for a DIY rig?
Gazecue is free to download, with unlimited scripts, the full prompter, a movable reading line and takes up to one minute. Pro adds unlimited take length, the mirror modes and the page-turner.
Do I need to mirror the text for a DIY teleprompter?
Only for a glass rig, because the glass reverses the reflection. A no-glass setup shows the text directly, so leave mirror off.