Self Tape Setup on iPhone: How to Do a Self Tape
A good self tape setup with an iPhone needs six things: the phone on a tripod at eye level, soft light on your face, a plain backdrop, clean sound, a reader who stands next to the lens and a short slate. Do those well and the casting team sees you, not your equipment. When you have sides to learn on a tight deadline, a teleprompter app such as Gazecue can show the lines at the lens for rehearsal, but always follow the casting notice on whether reading from text is acceptable.
Always start with the casting notice
Every casting office and project sets its own rules for self tapes: file format, length, slate, framing, number of takes and how to name and upload the file. Those instructions override anything on this page. Read them first, make a short checklist from them and set up around that list.
This page covers the parts that stay the same from job to job: how to set up an iPhone, what to look at, how to light and sound-proof a corner of a room and how to run a session so you finish with a strong take.
The self tape setup in 10 steps
- Read the notice and the sides. Note the format, length and slate request.
- Pick a corner of the room with a plain wall about an arm's length or more behind you.
- Mount the iPhone on a tripod or stable stand. No hand-held takes.
- Set the camera at eye level, roughly at the height of the reader's face.
- Frame as the notice asks. If it does not say, a medium close-up (chest up) is the common starting point.
- Light your face from the front with soft light; check for shadows.
- Check sound with a test recording in the actual room.
- Place the reader just beside the lens, off-camera.
- Record a slate if asked, then your takes.
- Review, choose, name and export the file exactly as requested.
Where to put the iPhone and how to frame
| Item | Setting | Notes |
|---|---|---|
| Orientation | Horizontal (landscape) unless told otherwise | Most casting platforms expect landscape; the notice rules |
| Height | Eye level | Avoid shooting up your nose or down on your head |
| Distance | Enough to frame chest up (medium close-up), or as requested | Leave a little space above your head |
| Camera | Back camera if you can | Usually the best quality; use a second person or a mirror to check framing |
| Stability | Tripod or phone stand | A shaking frame distracts from the performance |
| Focus and exposure | Tap on your face; lock if the phone offers it | Prevents the picture from changing during the take |
| Eye line | Next to the lens, not at it, for scene work | The reader sits just beside the camera |
For general phone-filming advice such as stabilisation and resolution, see how to film yourself with an iPhone.
Lighting for a self tape
Light should be soft and come from the front, so the casting team can see your eyes and face clearly. Natural light from a window is excellent if it is steady. Stand facing the window, or turn toward it at an angle. Avoid sitting with the window behind you.
- Key light: the main light, in front of you and slightly to one side, a bit above eye level.
- Fill: a white card, wall or second softer light on the other side to lift shadows.
- No mixed colours: switch off lamps with a different colour than your main light so skin tones stay even.
- Consistency: if you shoot in daylight, finish before the light changes or close the curtains and use a lamp.
Backdrop and wardrobe
A plain, uncluttered, mid-tone wall works best. Keep a little distance between you and the wall so you do not cast a shadow on it. For wardrobe, suggest the character without a costume: solid colours that differ from the wall, no large logos, no busy patterns, nothing that rustles against a microphone.
Sound: the part that gets tapes rejected
Poor sound spoils a good performance. Choose a quiet room, switch off fans and appliances, close windows and put the phone on silent. Soft furnishings such as curtains, rugs and a bed behind the camera reduce echo. Record ten seconds, listen with headphones and fix what you hear. If your tape allows it and the iPhone microphone is not enough, a small clip-on or shotgun microphone placed near, but outside, the frame can help.
The reader: who, where, and how
A self tape reader reads the other characters' lines. A friend is ideal, since they can give real reactions. Ask them to sit or stand right next to the lens, at the same height, and to read plainly without performing; you play to their face, not to the lens. If you need a different eye line, the casting notice usually says. Without a person, record the other lines on a voice memo and play them back, leaving gaps for your lines, or ask the notice whether a reader is expected.
The slate
A slate introduces you at the start of the file. Typical content is your name, sometimes height, location and the role you are reading for, spoken to the lens, facing the camera. Do exactly what the notice asks, no more, with a calm smile. If a profile shot or hands shot is requested, add it in the same take.
Self tape tips for acting auditions
- Make choices. A clear choice about who you are talking to and what you want beats a neutral read.
- Learn the lines. If you can, be off-book. Where it is accepted to hold sides, keep them below the frame and look up.
- Do several takes, change one thing each time, and pick the take that feels alive rather than the cleanest.
- Keep the eye line steady. Look at the reader's face beside the lens, not at the lens, unless told otherwise.
- Do not wait for the reader to finish before you listen. Reacting is acting.
- Respect the deadline. Plan time to learn, shoot, review and upload.
- Keep files small enough to upload while following the format requested.
Memorizing is its own skill. For scene work see how to memorize lines, and for an overview of how actors use prompter tools, teleprompter for actors.
Can I use a teleprompter for a self tape?
It depends on the project. Some casting offices expect you to be off-book; others accept sides in hand. A teleprompter is useful for two things that are always fine: learning your lines quickly by reading them aloud at a controlled pace, and recording a rehearsal take to see how you look. For the final tape, follow the notice. If reading is acceptable, putting the words at the lens keeps your eyes up, but remember that scene work normally needs an eye line to the reader, not to the camera.
How to do it with Gazecue
Gazecue is a free iPhone and iPad teleprompter that records while the script scrolls. For self tape preparation:
- Import the sides (.txt, .md, .rtf or .pdf) or paste the lines into the script editor.
- Set the words-per-minute speed to match the scene; the default is 150 and it can be adjusted while scrolling.
- Use Prompter only mode to run the lines aloud, without recording, until you know them.
- Set a countdown (3, 5 or 10 seconds) so you can settle into the scene before the text moves.
- Record a rehearsal take with the back camera and watch it in Recordings to check framing, light and sound.
- For the final tape, record in your normal camera app or in Gazecue, according to what the notice allows.
Free takes run up to one minute; Pro lifts the limit and removes the small mark on shared videos. A Pro keyboard or Bluetooth page-turner lets you move through the text from a distance. See how to use a teleprompter on iPhone and the features page.
Self tape equipment: what you really need
| Item | Need it? | Notes |
|---|---|---|
| iPhone | Yes | The camera on a recent iPhone is enough |
| Tripod or stand | Yes | Stability matters more than anything else |
| Light | Window or a soft lamp | A ring light is optional |
| Microphone | Optional | Only if the room is quiet and the tape still sounds thin |
| Backdrop | A plain wall | A fabric backdrop works if there is no wall |
| Reader | Strongly recommended | A person beats a recording |
| Teleprompter app | Optional | For learning lines and rehearsing |
Export, naming and upload
- Trim the head and tail so the file starts at the slate and ends after your last line.
- Pick the take(s) the notice allows. Do not add effects, music or titles.
- Name the file the way the notice asks. If it says nothing, use your name, role and project.
- Check size and format requirements, then upload.
- Watch the uploaded file once, if the platform allows, to confirm picture and sound.
A worked example: a two-page scene in one evening
A deadline of 24 hours, a two-page scene and a friend who can read. A realistic plan:
| Time | Step |
|---|---|
| 0:00-0:30 | Read the notice, read the sides twice, mark the beats where your character changes |
| 0:30-1:30 | Learn the lines aloud, in Prompter only mode or with a script sheet, until you can say them in order |
| 1:30-2:00 | Set up: tripod, light, backdrop, sound check |
| 2:00-2:30 | Run the scene once with the reader, adjust the eye line and framing |
| 2:30-3:30 | Record five or six takes, changing one choice each time |
| Next day | Watch with fresh eyes, choose, trim, name and upload |
Troubleshooting a self tape
| Problem | What to check | Fix |
|---|---|---|
| Skin looks orange or green | Mixed light colors | Use one light source, switch off the rest |
| Face too dark | Light too weak or behind | Move toward the window, add a lamp in front |
| Background looks cluttered | Objects in frame | Move to a blank wall or hang a plain sheet |
| Muffled sound | Room or distance | Soft furnishings, move the phone closer, test with headphones |
| Reader's voice louder than yours | Reader near the microphone | Ask the reader to speak more quietly or move farther back |
| Eyes look away from the reader | Reader too far from the lens | Seat the reader right beside the camera |
| Video file too large | Long take or high resolution | Trim to what the notice asks and follow the size limit |
| Phone stops recording | Storage full | Free space before you start |
Copyable self tape checklist
[ ] Notice read: format, length, slate, deadline, file name
[ ] Sides learned (or allowed in hand?)
[ ] Phone charged, storage free, silent mode, Do Not Disturb
[ ] Phone on a tripod, eye level, landscape unless told otherwise
[ ] Face lit from the front, no mixed colors
[ ] Plain backdrop
[ ] Sound test with headphones
[ ] Reader seated beside the lens
[ ] Slate recorded as asked
[ ] 3 to 6 takes
[ ] Best take chosen after a break
[ ] File trimmed, named, uploaded, checkedA simple slate to adapt
Follow the casting notice first. If it only says to slate, a calm, short version works:
Hi, I'm [full name], reading for [role] in [project].
(pause, smile, then start the scene)Which iPhone settings to check before you record
These are general iPhone habits, not casting rules: turn on Do Not Disturb so a call does not interrupt a take; free up storage; clean the lens; lock focus and exposure by pressing and holding on your face in the camera app, if the app offers it; and do a short test, watching it on a bigger screen if you can. Wired or wireless earphones for your own monitoring are optional.
Common self tape mistakes
| Mistake | Why it hurts | Fix |
|---|---|---|
| Camera too low or too high | Distorts your face | Eye level |
| Light from behind | Dark face | Face the light |
| Echoey room | Lines are hard to understand | Soft furnishings, closer to the mic |
| Looking into the lens during scene work | Breaks the scene | Eye line next to the lens |
| Reader too loud or too expressive | Steals focus | Ask the reader to read plainly |
| Last-minute shoot | Rushed performance | Plan time for several takes |
| Ignoring the notice | The tape may be rejected | Make a checklist from it |
FAQ
How do I do a self tape with an iPhone?
Mount the phone on a tripod at eye level, light your face from the front, use a plain backdrop, check sound, place a reader beside the lens and follow the casting notice for slate, format and length.
What is a self tape?
It is a video audition you record yourself and send to casting instead of auditioning in the room.
Should I film a self tape horizontally or vertically?
Follow the casting notice. If none is given, landscape is the usual choice for acting auditions.
Where should I look in a self tape?
For scene work, look at your reader's face beside the lens, not into the lens, unless the notice says otherwise.
Do I need a reader for a self tape?
A person is the best option because you get real reactions. If you have nobody, play recorded lines with gaps or ask the casting office what they prefer.
Can I use a self tape app or teleprompter?
A teleprompter app such as Gazecue helps you learn and rehearse lines. Whether you may read from text in the final tape depends on the casting notice.
What do I wear for a self tape?
Wear solid colours that contrast with the wall and suggest the character, without big logos or busy patterns.
How many takes should I do?
Several, changing one thing each time. Choose the take that feels most alive and send what the notice allows.
How long should a self tape be?
Whatever the casting notice says. Do not exceed the requested length; trim head and tail.
Can I do a self tape with a phone instead of a camera?
Yes. A recent iPhone is usually enough if the light, sound and framing are good, unless the notice asks for something else.